What is the easiest way to remove a 3d print from a bed? Simple Method for removing sticky 3d-printed Objects from the Build-Plate. Removing your 3D Print from the Build Plate. Removing your model from the build plate.How to remove your print from the build plate.How To Remove 3D Prints From The BedIs your 3D print stuck to the bed?How to separate the parts from their base plate.How to Remove Support Structure from 3D Prints.Best way to remove 3d printed parts from the base plate!
Novicut-M AM3D: best solution for your 3D AM metal parting
SPECIAL MACHINE FOR ADDITIVE MANUFACTURING
We offer THE BEST Cut-off tool for 3D Metal Additive Manufacturers: affordable, high speed, reliable, efficient and super economical.
ADDITIVE MANUFACTURING -- METAL 3D PRINTING
Worlds best solution for easy, reliable and economical cutting off your workpieces from the Metal 3D printer's base plate
Novicut-M AM3D:
best solution for your 3D AM metal parting!
Our Machine do remove fast and at a fraction of the cost of the others, easily and economically all your parts from their base-plate made by following processes :
AM : Additive Manufacturing
RP : Rapid Prototyping
Power Bed Fusion
SLS : Selective Laser Sintering
SLM: Slective Laser Melting
DMLS : Direct Metal Laser Sintering
EBM : Electron Beam Melting (Laser Cusing)
Metal Binder Jetting
BEST BASE PLATE REMOVAL TOOL: NovicutM-AM3D
Novick Europe introduces its Novicut-M-AM3D series
Additive manufacturing cutting Machines
High-performance wire cutting machine for separating components made of materials that are easy to difficult to machine from their base plate using an additive manufacturing process.
Designed as an affordable and reliable wire EDM solution
to economically remove metal 3D-printed parts from their build plate.
Based on our standard machine build since more than 20 year,
The Novicut-M-AM3D can handle build plates ranging from
100 x 100 mm to 500 x 1000 mm.
Bigger sizes on demand!
-
The Wire EDMs are equipped with a reusable Molybdenum wire feature, which quickly moves inexpensive wire from the source capstan, to the receiving capstan, and then back again so that the wire is continuously moving back and forth through the workpiece.
-
The rapid speed of the wire (10 - 50 times higher than normal brass wire cutting machines) creates its own flushing so high-pressure pumps are not required.
-
The Molybdenum wire is very resistant to wire breaks, offering an advantage over the brass wire that is typically used in a wire EDM.
-
The dielectric used is a mixture of water and oil to reduce oxidation on the part surfaces.
NOVICUT-M AM3D : Wire EDMs Designed for Metal 3D-Printed Part Cut Off
We offer a cutting process that is:
Stable and reliable
Fast cutting:
Medium speed for hard materials is around 150-220 mm²/min = 9000 - 13.200mm²/hour
High speed for hard materials is till 360 mm²/min = 21.600mm²/hour
Handle ALL hard conductive materials
Reliable : based on an 30 years existing technology
With a minimum loss of material (0.18mm)
Precise : +- 0.005 mm
Zero-force cutting: never damage a part
With low investment
At a ridiculous low cutting cost per hour
Easy to operate
Flexible : fit for most of the base plates of any brand
We reuse our wire continiously
Almost no wire breakage problem by powder inclusions
The EDM range is intended as an affordable option for removing metal 3D-printed parts from build plates.
Our novicut M -AM3D offers the fastest and higest ROI
Your machine pays back itself with the highest Return on Investment on the machine market
Compare sawing, wire cutting and moly wire cutting for removal of AM parts
Solutions available to remove your parts from the baseplate
| 400 x 400 mm baseplate sample | Manual bandsaw | Automatic bandsaw | Special AM bandsaw | Wire cutting machine | novicut-M AM-3D |
| investment | 8-15.000€ | 24 - 40.000,€ | 80 - 120.000,€ | 90 - 150.000,€ | 35 - 50.000, € |
| operator needed for | all time | setup - collect | setup | setup-collect | setup - collect |
| Thickness of cut : material losses | 1- 2 mm | 1,4 - 2,8 mm | 0,9 -1,2 mm | 0,3mm | 0,18mm |
| Cutting time | Short | Short | Short | very long | Average - short |
| Cutting forces on part | big | Big | Big | None | None |
| Precision of positioning | 0,5mm | 0,5mm | 0,3mm | 0,01mm | 0,01mm |
| Angle deformation compensation | no | no | no | yes | yes |
| multiple plates loaded in machine possible (unmanned long run at night) | no | no | no | yes | yes |
| Dustfree - healty | no | no | yes | yes | yes |
HIGH SPEED WIRE CUTTING MACHINES
The EDMs are equipped with a reusable Molybdenum wire feature, which quickly moves inexpensive wire from the source capstan, to the receiving capstan, and then back again so that the wire is continuously moving back and forth through the workpiece. The rapid speed of the wire (till 50 times faster than a normal wire cutting machine) creates its own flushing so high-pressure pumps are not required. The Molybdenum wire is very resistant to wire breaks, offering an advantage over the brass wire that is typically used in a wire EDM. The dielectric is a mixture of water and oil to reduce oxidation on the part surfaces.